As a cannabis grower, you’re unlikely to get your hands on any oil or bud at the moment, but it’s not hard to make something from cannabis.
Here’s how to do it at home, and to make it more convenient for those who don’t want to get their hands on anything.1.
Find a pot that you want to grow cannabis on.
If you don’t have a pot yet, you can buy a few from a local shop or grow centre.
Theres a good chance that the pot you want is growing in a neighbouring garden.
If not, you’ll probably have to find a grow site.2.
Place a large pot in the middle of a room with no openings in the walls.
It will take a few tries before you get the hang of it, but once you do, you should be able to make the best quality cannabis oil.
You’ll need to find out what kind of pot you’re going to grow, which one it is and where it is growing, but they are fairly easy to find.3.
Cut a hole in the wall.
The pot you are making from will be made from a large piece of pot that has been cut into a square, like this.4.
Lay the pot down on a flat surface, as the cut ends will allow you to place the oil on it.
Put the oil in the pot, then take a couple of inches of soil and gently put a layer of it on top of the cut.
Use the soil to spread the oil out over the cut, creating a good seal.
Once the oil has been spread, gently pull it out of the pot.
If you want, you could try using a plastic bag to hold it in place.6.
Add a couple more pots and the oil will be ready to go. 7.
Grow your own.
You can use a few different methods to make your own cannabis oil, depending on your needs.
I used to grow my own cannabis at home as a hobby, and I’ve made some good friends.
Here’s how you make your favourite pot.8.
Fill your pot with oil.
Now that you’ve got a pot, you want it to grow into a large plant that will last for many years.
A good way to do this is to use a garden supply company.
Once the oils are done growing, you will need to make them.
To do this, place the pot into a microwave oven, with the lid on, and put the pot on a baking tray lined with parchment paper.
Using a large, heavy wooden spoon, mix up the oil.
When you are done, remove the pot from the microwave, place it in the freezer and freeze for a couple hours.
Mix the oils again.
Finally, you have to add the oil to the pot as you normally would, but instead of using a bowl, put the bowl over the pot and pour in the oil, using a spoon to pour it in. 11.
Freeze for another few hours.12.
When ready, transfer the oil from the fridge to the freezer.
Take it out, put it in a bowl and mix it all up.
Make sure that you are keeping the jar in the fridge, or you could end up with a few jars full of oil that you can’t use.
Dry it out.
This is a very common method, and it can also be done indoors.
Slice off a chunk of the outer skin.
After the oil is dry, cut the oil into small pieces and place them into a glass jar.
Wash your buds.
With cannabis oil is a pretty strong plant and it will take time to dry out, so you’ll need some time to wash them.
Clean your pipes.
There are many ways to clean your pipes, but you can either just use the oil or soak them in hot water to make sure they don’t smell.18. Seal them.